Komponentoversigt

Mini concrete mixing plant

Mini concrete mixing plant built into a container.
L 6000 mm x W 2500 mm x H 2400 mm
Weight 6000 kg.
Container contains:

1. Concrete mixer
2. Cement silo for 1000 kg. Batch content 1.7 m3
3. Cement screw conveyor with motor & gear
4. 2 x rubber belts
5. 2 x silo for sand & stones, volume 2.0 m3 with vibrators
6. Weighing unit for chemicals
7. 1 x control unit for mixing plant.

Control unit. Auto weighing of belt
Auto weighing of cement
Mixing time with alarm
Pause interval between different aggregates.
Option of print out.
Total electricity consumption 32 kW. 3 x 400 V.
Capacity approx. 6 m3 or 14400 kg. Top part of the cement silo & raw product silos must be installed on site. Connect water and electricity and the plant is ready for use.
Conveyor belt from silo to feed hopper can be supplied.

Concrete mixer Type Staring

Capacity

• 500 L
• 750 L
• 1000 L

with Renold worm gear.
Hinged grating.
1 x manually operated bottom opening.
Replaceable mixing arm & blades.
Weighing cells.
Control cabinet.

Craneway

Standard length 22000 mm. Width 3500 mm. Height 3500 mm.
2 x end sections I-profile 65 x 120 x 6000 mm.
2 x central sections I-profile 65 x 120 x 5000 mm.
2 x stk.
10 x feet 205 x 205 x 5 mm with 4 holes for concrete anchor (included)
Stabilisers 40 x 40 x 3 mm.
10 x legs I-profile 100 x 100 x 2000 mm.
Crane car fabricated in flat iron 129 x 115 x 600 mm.
Runner I-profile 60 x 115 x 2580 mm for electric hoist.
Guide rail for suspension of electrical cable.

Vibrating table with control panel

Vibrating table type V 3000.

2 x legs, vertical posts 70 x 70 x 5 mm.
Foot & top angle bar 70 x 70 x 5 mm.
With 4 concrete anchors 12 x 70 mm
1 x cross member 40 x 40 x 3 mm
4 x metal rings Ø 70 mm for rubber pads.
4 x rubber pads.
2 x vibrators MVE 300/3 V230/400. 3 kW. 50 Hz.

Vibrator frame 80 x 80 X 8 mm. With 3 x brackets for vibrator motor.
Control unit for vibrating table.
Bracket for mounting of control cabinet 5 mm iron plate.
Leg 40 x 40 x 3 mm sectional iron.
Base 250 x 250 x 5 mm with 2 x holes for concrete anchor.
Control unit with frequency converter, start & speed regulation.

Mould for concrete slats

Iron base plate 8 mm with welded sides and end pieces.
Nylon core “PEDH” bolted onto base plate.
Hardened metal rails 10 mm.
Ø 40 mm metal pipe for lifting mould.
5 – 6 metal holders for reinforcement mesh.
3 x holes for ventilation on removal of mould with handle.
Handle 10 mm for rotation of mould.
Metal guide rail for keeping mould stable.
2 x bottom members 80 x 40 x 3 mm for stabilising of mould.

Mould for channel element

Iron base plate 8 mm with welded sides and end pieces.
Ø 40 mm metal pipe for lifting mould.
2 x separate end pieces for recessing in element.

Feed hopper

4 legs 80 x 80 x 3 mm.
Iron frame 40 x 40 x 3 mm.
Steel hopper 2000 x 1000 x 3 mm.
Plastic covering 1870 x 3000 mm.
Discharge spout iron plate 3 mm.
Lever for opening/closing.
Hinged flap.
Vibrator MVE300/3.
Adjustable flap.
16 x concrete anchors 12 mm

Mould removal table

2 x rectangular legs 40 x 60 x 3 mm.
Frame 40 x 60 x 3 mm
4 x legs 70 x 70 x 5 mm with flange for concrete anchor.
8 x concrete anchors.

Electric hoist

GIS electric chain hoist type GCH250-2NF.
With main specifications:
Load capacity : 500 kg. In 2 chain sections.
Five group: 1Bm/M3.
Max. hook travel: 3000 mm.
Hoist speed: 4/1 m/min.
Manoeuvring cable length: 2.3 metres.
Power supply: 3 x 400 Volt. 50 Hz.

Transport lifting yoke
For transport of newly cast slats.

Square profile 40 x 40 x 3 mm.
Bolt point of rotation.
Eye for electric hoist 12 mm.
Angle bar 40 x 40 x 3 mm.
Top tie / yoke 30 x 50 x 3 mm.
Stop lug 40 x 40 x 3 mm.
Lever for opening of scissors Ø 12 mm.

Lifting yoke for removal of mould

Lifting yoke 15 x 250 mm.
Vertical bar 30 x 30 x 3 mm.
Inclined brace 30 x 30 x 3 mm.
Lifting section 40 x 60 x 3 mm.
Lifting bracket 55/60/45 x 50 x 10 mm
M 10 bolt in welded nut for attachment of hooks.
Lifting hook 680 x 50 x 10 mm.

Palletising yoke

Flat steel 80 x 10 mm.
Bolt point of rotation.
Arm / eye for electric hoist.
Legs 40 x 40 x 3 mm.
10 mm plate with rubber lining.
Bolt for attachment of legs.

Positioning machine

Versatile positioning cart with good balance; the tongs are placed over the wheels during transport.
Unladen weight 75 kg.
Wheels 2 x 400 Ø inflatable rubber and 2 x 160 Ø swivel-type solid rubber.
Hydraulics: 1 cylinder 32 Ø piston x 300 mm stroke length, accumulator with valve and hose.
Functional description: The load is lowered hydraulically in a controlled manner and the tongs are lifted hydraulically without load.
Max. lifting load approx. 200 kg. (depending on operator).

Liquid manure tank element mould

6 x legs 70 x 70 x 500 x 5 mm.
3 x longitudinal I-sections 100 x 60 x 5 mm.
2 x transverse I-sections 100 x 60 x 5 mm.
1 x transverse sectional pipe 80 x 50 x 5 mm.
1 x steel bottom 5000 x 1680 x 5 mm with welded-on Ø 10 mm pipe.
1 x side welded-on 5000 x 130 x 10 mm with recessing for reinforcement.
2 x end walls welded-on 1680 x 130 x 10 mm.
1 x side loose 5000 x 130 x 10 mm with handle Ø 20 mm with recessing for reinforcement with 3 x locking rods. “TURNUS-130”.
4 x locks for reinforcement 2410 x 60 x 5 mm. With handle 90 x Ø 16 mm.

Templates for casting elements together.
2 units of 2500 x 180 x 3 mm and 2 units of 2500 x 250 x 3 mm